The Weidmüller SAK feed-through terminals satisfy the requirements of IEC 60947-1 and are available with rated cross-sections from 0.08 mm² to 240 mm².
Weidmüller
|
2
Obchody
This type of cross-connection has a pre-assembled captive cross-connection lug, cross-connection sleeve and fixing screw. All the individual parts are available separately on request. During installat
Apart from a few exceptions, the last terminal in a terminal strip must be closed off with an AP end plate. End plates must also be used within a terminal strip when it makes use of terminals of diffe
Weidmüller
|
2
Obchody
This type of cross-connection has a pre-assembled captive cross-connection lug, cross-connection sleeve and fixing screw. All the individual parts are available separately on request. During installat
Weidmüller
|
2
Obchody
Apart from a few exceptions, the last terminal in a terminal strip must be closed off with an AP end plate. End plates must also be used within a terminal strip when it makes use of terminals of diffe
Weidmüller
|
2
Obchody
The SchT 5 S group tag carriers are clipped directly onto the TS 32 mounting rail (G-rail) or the TS 35 mounting rail (top-hat rail). It is therefore possible to label the terminal strip irrespective
Multi-pole terminal strips have been part of the Weidmüller portfolio for many years. The terminal rails can be screwed directly to the housing. A retightening of the clamping screw when setting the w
CLI C conductor markers are mounted on unconnected conductors. Four different sizes are available for labelling conductor cross-sections from 0.5 mm² to max. 70 mm². The markers are already printed an
Weidmüller
|
2
Obchody
The PE terminals are available with rated cross-sections from 1.5 mm² to 150 mm².
Weidmüller
|
2
Obchody
Some 60% of all modular terminals have a cross-connection. Weidmüller has a huge range of solutions on offer.
Weidmüller
|
2
Obchody
Some 60% of all modular terminals have a cross-connection. Weidmüller has a huge range of solutions on offer.
Weidmüller
|
2
Obchody
Apart from a few exceptions, the last terminal in a terminal strip must be closed off with an AP end plate. End plates must also be used within a terminal strip when it makes use of terminals of diffe
Weidmüller
|
2
Obchody
