Thorens MC TAS 1600

The newly developed Thorens "TAS 1600" cartridge is a Japanese-made low output MC that was specially developed for the THORENS TD 1600 and TD 1601. With an output voltage of 0.4 millivolts at 5.5 cm / s, it delivers sufficient levels to harmonize with common phono preamplifiers.With an internal resistance of 12 ohms, it feels in good hands at a terminating resistor of> 100 ohms. At the end of a massive boron cantilever sits a fine diamond with a line-contact cut, which elicits every musical fineness of the record groove.
Specifications

Model - TAS 1600
Mounting - 1/2” centers / Threaded inserts
Frequency Response - 20 - 50,000 Hz
Body - Aluminium
Channel Separation - 28 dB (1 kHz)
Output Channel Balance - 0.5 dB (1 kHz)
Output Voltage - 0.4 mV (1 kHz, 5 cm/sec)
Vertical Tracking Angle - 20 degrees
Tracking force, recommended - 1.8 to 2.2 g (standard 2.0 g)
Stylus Shape - Special Line Contact
Stylus Size - 1.5 x 0.28 mil
Stylus Construction - Nude rectangular shank
Cantilever - 0.28 mm Ø nude boron
Coil Impedance - 12 Ohms (1 kHz)
Coil Inductance - 25 μH (1 kHz)
DC Resistance - 12 Ohms
Static Compliance - 22 x 10 – 6 cm / dyne
Dynamic Compliance - 18 x 10 – 6 cm / dyne (100 Hz)
Terminal Pins - Brass
Wire Used for - Coil PCOCC (Copper by Ohno Continuous Casting process)
Recommended Load Impedance - min 100 Ohms
Cartridge Weight - 8.2 g
Made in: China
Frequency Range: 20 Hz - 50 kHz
Application: Hi-Fi
Type: Hi-Fi
Type: Cartridge
Suitable for Brand: Thorens
Material: Aluminium
Colour: Red
Tracking Force: 1,2g - 2,2g
Tracking force recommended: 2 g
Impedance (Ohm): 12.0
Weight (g): 0.0
Package Quantity (pcs): 1
Compliance: 18 x 10 - 6 cm
Channel balance at 1 kHz: 0,5 dB
Channel separation at 1 kHz: 28 dB
Shape: Special Line contact
Stylus tip radius: 1,5 x 0,28 mil
Tracking angle: 20°
Voltage: 0,4 mV (at 1 kHz, 5 cm/sec)
Weight: 8,2 g más