This speaker is ideally suited to applications where the program material exhibits subtlety and nuance. Perfectly capable of reproducing high fidelity full range sound without a subwoofer, when coupled with the extended low frequencies of the PRX818XLFW, complete control over the entire audio spectrum is attained. As with all the full-range PRX800 Series systems, two EQ selections can be used to optimize the system for the program material and/or environment. The input section also accommodates either Line or Mic/Instrument level inputs. The PRX835W is a self-powered, lightweight three-way loudspeaker system capable of delivering a very high level of performance over a wide bandwidth with remote Wi-Fi control of onboard DSP EQ parameters. The PRX835W is comprised of one 15 in 275G Differen tial Drive woofer, a 165 mm (6.5 in) 196H horn-loaded mid-range and a 2408H-2 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver mounted to a 90° by 50° horn, all driven by a 1500 watt Audio Class-D power amplifier. Sophisticated DSP is at the core of a fully featured input section, providing user selectable system EQ, protection, input sensitivity selection, cross-over functionality, dynamic limiting and discrete component optimization. All PRX800 cabinets are built from a combination of 25 mm (on the top and bottom for added rigidity) and 18 mm, strong, light-weight poplar plywood made structurally sound with tongue and groove joints. All PRX800 Series cabinets are protected by JBL's tour proven DuraFlex finish. Grilles are made from dent-resistant 16 gauge steel and handles are made from light-weight glass-filled nylon for added strength and durability. All M10 suspension points are constructed from 14 gauge steel and have been tested with a yield-strength of 1000 lbs. each. The amplifier input panel offers XLR or ¼ inch jack compatibility and a sensitivity switch provides extra flexibility, making it possible to connect literally any sound source without using a mixer. Signal present and overload lights indicate the system status and assist in setting the optimum level via the level control knob. Features Built-in Wi-Fi for wireless control of your system from anywhere in the venue Free PRX Connect mobile app for iOS and Android provides wireless control over volume levels, 8-band parametric EQ and up to 50ms of speaker delay to fine-tune your sound Class-leading 1500-watt amplifier delivers ample power to fill your venue JBL Differential Drive transducers for higher SPL in a lightweight design Next-generation JBL neodymium compression drivers Redesigned Crown input technology, including XLR, 1/4" and RCA inputs plus XLR loop-through Intelligent variable-speed fan activates only when needed to reduce noise Updated tuning delivers flat freq más

Producto mas barato

1.504,72 € | muziker.ro

¿Tienes un mejor producto en tu tienda?


Disponible en

Disponible en otros países


Que dicen las tiendas

muziker.es
This speaker is ideally suited to applications where the program material exhibits subtlety and nuance. Perfectly capable of reproducing high fidelity full range sound without a subwoofer, when coupled with the extended low frequencies of the PRX818XLFW, complete control over the entire audio spectrum is attained. As with all the full-range PRX800 Series systems, two EQ selections can be used to optimize the system for the program material and/or environment. The input section also accommodates either Line or Mic/Instrument level inputs. The PRX835W is a self-powered, lightweight three-way loudspeaker system capable of delivering a very high level of performance over a wide bandwidth with remote Wi-Fi control of onboard DSP EQ parameters. The PRX835W is comprised of one 15 in 275G Differential Drive woofer, a 165 mm (6.5 in) 196H horn-loaded mid-range and a 2408H-2 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver mounted to a 90° by 50° horn, all driven by a 1500 watt Audio Class-D power amplifier. Sophisticated DSP is at the core of a fully featured input section, providing user selectable system EQ, protection, input sensitivity selection, cross-over functionality, dynamic limiting and discrete component optimization. All PRX800 cabinets are built from a combination of 25 mm (on the top and bottom for added rigidity) and 18 mm, strong, light-weight poplar plywood made structurally sound with tongue and groove joints. All PRX800 Series cabinets are protected by JBL's tour proven DuraFlex finish. Grilles are made from dent-resistant 16 gauge steel and handles are made from light-weight glass-filled nylon for added strength and durability. All M10 suspension points are constructed from 14 gauge steel and have been tested with a yield-strength of 1000 lbs. each. The amplifier input panel offers XLR or ¼ inch jack compatibility and a sensitivity switch provides extra flexibility, making it possible to connect literally any sound source without using a mixer. Signal present and overload lights indicate the system status and assist in setting the optimum level via the level control knob. Features Built-in Wi-Fi for wireless control of your system from anywhere in the venue Free PRX Connect mobile app for iOS and Android provides wireless control over volume levels, 8-band parametric EQ and up to 50ms of speaker delay to fine-tune your sound Class-leading 1500-watt amplifier delivers ample power to fill your venue JBL Differential Drive transducers for higher SPL in a lightweight design Next-generation JBL neodymium compression drivers Redesigned Crown input technology, including XLR, 1/4" and RCA inputs plus XLR loop-through Intelligent variable-speed fan activates only when needed to reduce noise Updated tuning delivers flat frequency response and smooth off-axis behavior Durable wooden cabinets, tour-proven DuraFlex finish and dent-resistant 16-gauge grilles Universal power supply for worldwide compatibility dbx Type IV limiting ensures clear, accurate sound at high volumes Brutal testing regimen-including the famous JBL 100-hour power test-ensures reliable performance Specs System Type Self Powered 15", three-way, bass-reflex Maximum SPL Output 138 dB peak Frequency Range (-10 dB): Normal: 41 Hz - 20 kHz Boost: 41 Hz - 20 kHz Frequency Response (±3 dB) Normal: 50 Hz - 18.25k Boost: 48 Hz - 20k Input Connectors 2 x Balanced XLR / 1/4 inch input, 2 x unbalanced RCA input Input Impedance 20K Ohms (balanced), 10K Ohms (unbalanced) Signal Indicators Limit: Yellow LED indicates peak output has been reached and dsp limiter is acting Signal: Green LED indicates signal present Power: Blue indicates system has power and ready to pass audio. EQ User selectable presets for Normal or Boost, Advanced EQ settings available using Wi-Fi and PRX Connect application. Dynamic Control (Input) dbx Type IV limiter circuit Crossover Frequency 580 Hz, 2.1 kHz Design Highly efficient Class-D amplifier Power Rating 1500W (750W x 2) AC Power Input 100V - 240V ~ 50/60 Hz LF Driver 1 x JBL 275G 380 mm (15 in) woofer MF Driver 1 x JBL 196H 165 mm (6.5 in) horn-loaded midrange transducer HF Driver 1 x JBL 2408H-2 37.5 mm (1.5") annular...
Salidas: XLR
RMS de potencia: 750 W
Contenido del paquete: Manual;Power Cable
MP3 / Entrada de línea: No
Ancho (cm): 44.6
AUX IN: Sí
Fuente de alimentación: 240V
Entrada de micrófono: Sí
Altavoz central: 6,5"
Bi-Amp: Sí
Peso: 32,4 kg
Montaje en poste: Sí
Altura (cm): 93.8
Profundidad (cm): 53.9
Configuración de la oferta: Product
USB: No
Entradas: RCA;XLR/TRS kombi
Bluetooth: No
Rango de frecuencia: 34 Hz - 20 kHz
Variante: PRX835W
Modelo: PRX835W
Potencia RMS (vatios): 750.0
EQ: Sí
Alojamiento: Plywood Housing
Hecho en: México
Color: Negro
Tipo: 3 Bandwidth
WiFi: Sí
Altavoz de bajos (Woofer): 15"
Vivienda Multifuncional: Sí
Potencia (Watt): 1500.0
Pantalla / Monitor: No
UK/UE Fuente de alimentación incluida: No
Tweeter: 1,5"
Nivel de presión sonora - SPL (dB): 138.0
DSP: Sí