The standard electric marine toilets can be installed in both power and sailing craft, either above or below the water- line, for use on sea, river, lake or canal. The waste can be discharged either overboard (please have in mind national or local restrictions), or into a treatment system or into an on-board holding tank. You need: spiral reinforced smoothe bore flexible hose for both the 19 mm, internal diameter inlet and the 25 mm or 38 mm internal diamter outlet hose. Stainless steel hose clips for the hoses. Have in mind: Secure the hose runs so that the hoses cannot move, nor exert any leverage action on the hose tail fittings to whoch they are connected, as this may cause adjacent joints to leak. Avoid sharp bends in the hoses since this might cause them to become kinked. Keep all pi
pework lengths as short as possible while you are carrying out these operations. Unnecessary inlet or outlet hose lengths just make the toilet harder to pump.
Voltage: 12 V
Made in: Sweden más
Voltage: 12 V
Made in: Sweden más