24-channel professional USB 2.0 audio interface from RME. Created with the highest precision from a block of aluminum, this high-end portable interface incorporated newly designed analog and digital circuits. Its innovative energy saving technologies provided supreme fidelity with no compromises in level, noise or distortion.
In the new Babyface Pro FS even more improvements were implemented: +19 / +4 dBu switch on the bottom adds a direct way to reduce the output level, thus improves SNR for sensitive active monitors, avoids distortion / overload, and helps to keep TotalMix FX faders near 0 dB instead of high attenuations. Full SteadyClock FS circuit as in the ADI-2 Pro FS for lowest jitter and highest jitter immunity. 3.5 mm TRS phones output power rises from 70 mW to 90 mW. THD of both phones outputs improved by up to 10 dB. Uses same output op-amps as ADI-2 Pro now. Output impedance of 3.5 mm TRS lowered from 2 Ohms to 0.1 Ohms. Mic inputs SNR improved from 112.2 dB to 113.7 dB, TRS Line inputs SNR improved from 114 dB to 116.3 dB (120 dBA). THD Line inputs improved by 8 dB. 6 samples less latency on the AD side by new ADC (5 samples AD, 7 samples DA. It won't get quicker...). All the above improvements were achieved without raising the units power consumption. K-slot for theft protection.
Word Clock: No
Instrument Inputs: 2
Line Output: 4
S/PDIF: Yes
ADAT: Yes
AES/EBU: No
Phantom Power: Yes
Ethernet: No
Sample Rate: 192 kHz / 24 bit
Line Inputs: 4
Type: Desktop
Microphone Input: 2
Number of Preamps: 4
MIDI Interface: Yes
UK/EU Power supply included: No
USB version: 2.0
Made in: Germany
Compatible with: macOS
Compatible with: Windows
Controls: Volume
Headphone Output: Yes
Interface: USB B
Number of Channels: 4
Package Contents: Manual
Package Contents: USB Cable
Package Contents: Adapter
Rackmountable: No
USB: Yes más
In the new Babyface Pro FS even more improvements were implemented: +19 / +4 dBu switch on the bottom adds a direct way to reduce the output level, thus improves SNR for sensitive active monitors, avoids distortion / overload, and helps to keep TotalMix FX faders near 0 dB instead of high attenuations. Full SteadyClock FS circuit as in the ADI-2 Pro FS for lowest jitter and highest jitter immunity. 3.5 mm TRS phones output power rises from 70 mW to 90 mW. THD of both phones outputs improved by up to 10 dB. Uses same output op-amps as ADI-2 Pro now. Output impedance of 3.5 mm TRS lowered from 2 Ohms to 0.1 Ohms. Mic inputs SNR improved from 112.2 dB to 113.7 dB, TRS Line inputs SNR improved from 114 dB to 116.3 dB (120 dBA). THD Line inputs improved by 8 dB. 6 samples less latency on the AD side by new ADC (5 samples AD, 7 samples DA. It won't get quicker...). All the above improvements were achieved without raising the units power consumption. K-slot for theft protection.
Word Clock: No
Instrument Inputs: 2
Line Output: 4
S/PDIF: Yes
ADAT: Yes
AES/EBU: No
Phantom Power: Yes
Ethernet: No
Sample Rate: 192 kHz / 24 bit
Line Inputs: 4
Type: Desktop
Microphone Input: 2
Number of Preamps: 4
MIDI Interface: Yes
UK/EU Power supply included: No
USB version: 2.0
Made in: Germany
Compatible with: macOS
Compatible with: Windows
Controls: Volume
Headphone Output: Yes
Interface: USB B
Number of Channels: 4
Package Contents: Manual
Package Contents: USB Cable
Package Contents: Adapter
Rackmountable: No
USB: Yes más