This hand-built cartridge features an elliptical stylus; its shape enables it to more accurately trace the highest frequency record grooves giving it the advantage over ordinary spherical types. The lightweight shank also gives the stylus a lower tip mass than cheaper metal bonded types lending the cartridge an improved transient response.
Low Mass Pocan® BodyThe 1000 series uses a strong one piece body which holds the fixed parts securely in place. Made from a special type of ultra-rigid, glass reinforced polyester called Pocan, the body can be tightly bolted to the head shell for maximum efficiency and optimum sound quality. The user replaceable stylus carrier slots tightly into the body with a locating pin preventing unwanted vibrations which would otherwise colour the sound. An integral mu-metal can keeps the generator parts shielded from hum-inducing stray magnetic fields. Because Pocan has a high strength-to-mass ratio, the overall mass of the G1000 series cartridges is kept below 6.5 g. Low mass and moderate compliance keep the natural arm/cartridge resonance within safe limits for easy matching to a wide range of tonearms.
High Efficiency Magnetic Circuit - This unique design reduces mass and also makes for a very efficient magnetic circuit producing a higher than average output. This construction also reduces the loss at high frequencies inherent in conventional designs, making for a smooth and extended frequency response.
The 1000 series uses a unique ultra-low-mass, micro-miniature Alnico V magnet made to a tolerance that can be achieved by no other manufacturer worldwide. Welded to the magnet is a gold plated nickel tie-bar which provides an earth path for vinyl static charge build up and stabilses the cantilever in unwanted vibrational modes. The whole ultra-low-mass assembly is then mounted in a special butyl rubber polymer with optimised damping characteristics.
Application: Hi-Fi
Colour: Black
Made in: Great Britain
Frequency Range: 20 Hz - 20 kHz
Shape: Elliptical
Tracking Force: 1,5g - 2g
Type: Replacement Stylus
Variant: G1006
Weight (g): 6.3
Compliance: 24 mm/N
Channel balance at 1 kHz: 2 dB
Channel separation at 1 kHz: 25 dB
Recommended load capacitance: 150 - 200 pF
Recommended load resistance: 47 kOhm
Tracking angle: 24°
Tracking force recommended: 1,7 g
Voltage: 6,5mV (1kHz, 5cm/sec.) más
Low Mass Pocan® BodyThe 1000 series uses a strong one piece body which holds the fixed parts securely in place. Made from a special type of ultra-rigid, glass reinforced polyester called Pocan, the body can be tightly bolted to the head shell for maximum efficiency and optimum sound quality. The user replaceable stylus carrier slots tightly into the body with a locating pin preventing unwanted vibrations which would otherwise colour the sound. An integral mu-metal can keeps the generator parts shielded from hum-inducing stray magnetic fields. Because Pocan has a high strength-to-mass ratio, the overall mass of the G1000 series cartridges is kept below 6.5 g. Low mass and moderate compliance keep the natural arm/cartridge resonance within safe limits for easy matching to a wide range of tonearms.
High Efficiency Magnetic Circuit - This unique design reduces mass and also makes for a very efficient magnetic circuit producing a higher than average output. This construction also reduces the loss at high frequencies inherent in conventional designs, making for a smooth and extended frequency response.
The 1000 series uses a unique ultra-low-mass, micro-miniature Alnico V magnet made to a tolerance that can be achieved by no other manufacturer worldwide. Welded to the magnet is a gold plated nickel tie-bar which provides an earth path for vinyl static charge build up and stabilses the cantilever in unwanted vibrational modes. The whole ultra-low-mass assembly is then mounted in a special butyl rubber polymer with optimised damping characteristics.
Application: Hi-Fi
Colour: Black
Made in: Great Britain
Frequency Range: 20 Hz - 20 kHz
Shape: Elliptical
Tracking Force: 1,5g - 2g
Type: Replacement Stylus
Variant: G1006
Weight (g): 6.3
Compliance: 24 mm/N
Channel balance at 1 kHz: 2 dB
Channel separation at 1 kHz: 25 dB
Recommended load capacitance: 150 - 200 pF
Recommended load resistance: 47 kOhm
Tracking angle: 24°
Tracking force recommended: 1,7 g
Voltage: 6,5mV (1kHz, 5cm/sec.) más