2000W 220V Industrial Adjustable Temperature Hot Air Blower Rework Station with 2Pcs Nozzles

Features Electronic temperature control Sensor closed loop microcomputer triggered temperature control over 0 temperature stability Double v ortex flow out of wind soft air without damage High quality alloy heating core imported switch imported motor High and low two gear wind and temperature adjustment minimum temperature 50℃ maximum temperature 650℃ Application 1 It can remove the old paint on the metal surface and bettereffect use with hot air nozzle and the scraper 2 Self sticky sticker can be removed 3 It can be relieved of rust or too tight nuts and metal screws 4 It can make the plastic hose bend 5 Before handling the grease or replace the old mill can first softening 6 Dry the damp wood 7 Heat shrinkable packaging film and packaging pipe 8 Can collapsible polyethylene that used to connect metal 9 Softening welding material Specification Color Yellow BlueMaterial Plastic ShellVoltager 220V 50HzPower 2000WWorking Temperature 60℃ 650℃Air Volume 250L min Low mode 500L min high mode Cable Length approx 140cmSize approx 26cm x 19cmWeight approx 584gNote Can not adjust the temperature dual temperature control can only adjust a high temperature file a low temperature file Warning Do not use the hot air g un with the chemical plastic scraper Please remove the dry paint from the nozzle or the scraper to avoid the fire after use Dont direct a hot wind directly to a person or an animal Do not touch the nozzle when the hot air g un