Male headers made from glass-fibre-reinforced plastic with straight wire outlet; optimised for wave soldering. The flange variant (F) can be screwed onto the mating connector or the circuit board. The
Male headers made from glass-fibre-reinforced plastic with straight wire outlet; optimised for wave soldering. The flange variant (F) can be screwed onto the mating connector or the circuit board. The
Male headers made from glass fibre-reinforced plastic with 90° wire outlet; optimised for wave soldering. The flange variant (F) can be screwed onto the mating connector or the circuit board. There is
Female plugs with crimp wire connection system.The female plugs provide space for labelling and can be coded. 0.25 - 2.5 mm² (IEC) / 26 - 14 AWG (UL)400 V (IEC) / 300 V (UL)21 A (IEC) / 10 A (UL) Obs
Obsahuje: 100 ks·Počet řádků: 1·Počet pólů: 3
The SC pin header in 270°-outlet direction: the 270° angle exists between the plugging direction and the solder pin. The plugging direction is then parallel to the PCB. Sockets blocks, however, have a
Female header with crimp connection system enable rational prefabrication of cable looms and guarantee a distinct cost-saving. The BLAC is also available with dovetail (B) for convenient attachment of
Female header with crimp connection system enable rational prefabrication of cable looms and guarantee a distinct cost-saving. The BLAC is also available with dovetail (B) for convenient attachment of
Rectangular plug-in connector for use with crimp contacts. Can be used as universal coupling, but also with the PCB variations. The crimp contacts guarantee a high connection density. CS 1.6 or CB 1.6
High-temperature-resistant pin header (SC-SMT 180LF) in 3.81-mm pitch (0.15 inch) Plugging direction is perpendicular to PCB (standing) With solder flange (LF).Packed either in box (BX) or on anti-sta
High-temperature-resistant pin header (SC-SMT 90LF) in 3.81-mm pitch (0.15 inch) Plugging direction parallel to PCB (recumbent) With solder flange (LF).Packed either in box (BX) or on anti-static roll
High-temperature-resistant pin header (SC-SMT 180LF) in 3.81-mm pitch (0.15 inch) Plugging direction is perpendicular to PCB (standing) With solder flange (LF).Packed either in box (BX) or on anti-sta
