Neumann TLM 49

Large-diaphragm studio microphone with a cardioid directional characteristic and a warm sound which is especially optimized for vocal performance. Its unique design is inspired by that of the legendary M 49 and M 50 microphones of the 1950s. By combining its retro look with proven Neumann transformerless circuit technology, this microphone ensures low self-noise and the use of high gain levels. During the development phase, the sound was adjusted in extensive practical tests, so as to make the microphone ideal particularly for vocal and speech recording. However, in addition, it is also suitable for instrumental applications in professional production studios and demanding home recordings. The large-diaphragm capsule provides a cardioid directional characteristic with a tendency toward sup ercardioid, due to the special capsule construction. Following the example of the M 49, high frequencies are more directional. The capsule diameter is 34 mm. The front of the microphone is indicated by the red Neumann logo on the microphone body. The capsule is oriented so that the microphone is addressed from the front. The microphone uses the famous K 47 capsule, which was also used in the M 49 and the U 47. The capsule has a linear frequency response up to the upper mid-range. Above 2 kHz there is a gentle presence boost up to 3 dB. The capsule is enclosed by a large microphone headgrille, which is acoustically very open and is hence neutral with regard to the sound. With its TLM (“transformerless microphone”) technology the usual output transformer is replaced by an electronic circuit. As with traditional transformers, it ensures good common mode rejection, and prevents RF interference that may influence the balanced audio signal. Noise signals which affect the balanced modulation line are therefore effectively suppressed. The microphone can operate at sound pressure levels of up to 129 dB without distortion, and provides a dynamic range of 117 dB (A-weighted). The entire interior structure is mounted elastically, to prevent the transmission of structure-borne noise. In addition, the capsule is mounted with a rubber shock mount. Due to the wide frequency response, the microphone can also transmit extremely low-frequency signals without coloration. Of course this means that the microphone is also sensitive to noise signals such as vibration noise and wind noise in this frequency range. Therefore it is supplied with the elastic suspension EA 3, which effectively protects the microphone from structure-borne noise. Matte Nickel finish.
Made in: Germany
Frequency Range: 20 Hz - 20 kHz
Weight: 825 g
Impedance: 50 Ohm
Polar Pattern: Cardioid
Type: Condenser
Package Contents: Holder
Package Contents: Microphone más