Please Note that LED UV light doesnt include Features K 302 is a high intensity UV curable acrylate adhesive good versatility good storage stability Dedicated to the bonding glass and various metals fixed for glass crystal and metal such as aluminum carbon steel stainless steel galvanized steel etc have a good bonding effect Specification Appearance colorless or pale amber liquidViscosity cps 600100 Brookfield DV II viscometer at 25C SC 4 15 150rpm Hardness Shore D 69 GB T 531 1999 curing test Elongation 120 GB T 528 1998 curing test Typical curing nature K 302 will be cured under ultraviolet light the sun will slowly solidified Cure rate depth and ultimately curing effect is dry and UV light source exposure time the transmittance of the material and other factors Recommended to determine the specific curing time by experiment Positioning time 2mm thick ordinary glass 10 seconds F20T8 BL UV lamp 6 seconds 125W PHILIPS fluorescent high pressureUsage Steps 1 Depending on the material surface treatment surface dry and clean no weak boundary layer 2 Interface adhesive bonding material on the need for continuous coating be careful not to disperse 3 Light positioning the glue into the short ultraviolet curing lamp radiation until the hand nudging fixed 4 To remove the excess glue with a knife to scrape the glue overflow or a soft cloth paper towel and gentlyerase the excess glue can also be dipped in acetone alcohol wipe
Price history
Apr 18, 2022
€13.42